Zipato Micromodule Switch Double enables you to control an in-wall switch or power outlet with the Zipato home automation controllers or any Z-Wave remote or module’s built-in push button. This small, hidden Z-Wave module installs in the electrical box behind your switch/outlet, and wires in between your switch/outlet and two connected loads. How it works: When the module is installed behind a twogang wall switch, the wall switches no longer directly control the connected loads. Instead, both switches serve as inputs for the module, which has an internal relay to control the connected loads. This relay transmits commands to your loads from the wall switch or a Z-Wave remote. It supports two loads up to 1500W each and has a built-in overload protection.
Voltage, Current, Power factor, Instant power wattage and Accumulated power report. Resistive load 1500W x 2 . Zero-crossing switch. The new Z-Wave 500 series chip supports multichannel operation and higher data rates (9.6/40/100kbps). Overload protection. Auto reports wattage when variation exceeds 5%.
Gross height (mm):
Tare weight (kg):
Minimum 40 meters indoor 70 meters outdoor m
Supported network protocols:
OPERATING VOLTAGE: 100~240VAC. MAXIMUM LOAD: 6.5A (230VAC/120VAC) (Resistive load) . OPERATION TEMPERATURE: 0°C ~ 40°C
Maximum indoor range:
Producer product name:
Micro Module Switch double 2x1.5kW